Cisco A9K-SIP-700 Configuration Guidelines

VPLS ID - 120:100
Route Target - 12:12
Enabling VC type 4 for BGP Autodiscovery
This example shows how to configure virtual connection type 4 in VPLS with BGP autodiscovery:
l2vpn
bridge group bg1
bridge-domain bd1
transport-mode vlan passthrough
interface GigabitEthernet0/0/0/1.1
!
neighbor 2.2.2.2 pw-id 1
!
vfi vf1
vpn-id 100
autodiscovery bgp
rd auto
route-target 1:1
signalining-protocol ldp
!
!
!
!
VPLS with both BGP Autodiscovery and Manual Provisioning of VPLS Peers
This example shows VPLS configuration with BGP autodiscovery as well as manual provisioning of VPLS
peers that are not participating in the BGP autodiscovery process.
!
l2vpn
bridge group bg1
bridge-domain bd1
!
vfi vfi1
vpn-id 500
autodiscovery bgp
rd auto
route-target 65533:12345678
signaling-protocol ldp
vpls-id 65533:12345678
! Manually provisioned peers
neighbor 10.10.10.2 pw-id 102
!
Configuring Dynamic ARP Inspection: Example
This example shows how to configure basic dynamic ARP inspection under a bridge domain:
config
l2vpn
bridge group MyGroup
bridge-domain MyDomain
dynamic-arp-inspection logging
This example shows how to configure basic dynamic ARP inspection under a bridge port:
config
l2vpn
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
340
Implementing Multipoint Layer 2 Services
VPLS with both BGP Autodiscovery and Manual Provisioning of VPLS Peers

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English