• The import keyword imports routing information from the target VPN extended community.
• The export keyword exports routing information to the target VPN extended community.
Step 10 rd { 2-byte as_number | 4-byte as_number | IP_address | none } : { nn }
Example:
RP/0/RSP0/CPU0:router(config-evpn-evi-bgp)# rd 25:30
Configures the route distinguisher.
Step 11 Use the commit or end command.
commit - Saves the configuration changes and remains within the configuration session.
end - Prompts user to take one of these actions:
• Yes - Saves configuration changes and exits the configuration session.
• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.
Configuring Global EVPN Timers
Perform this task to configure global EVPN timers.
SUMMARY STEPS
1. configure
2. evpn
3. timers [flushagain | peering | programming | recovery]
4. Use the commit or end command.
DETAILED STEPS
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2 evpn
Example:
RP/0/RSP0/CPU0:router evpn
Enters EVPN configuration mode.
Step 3 timers [flushagain | peering | programming | recovery]
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
393
Implementing IEEE 802.1ah Provider Backbone Bridge
Configuring Global EVPN Timers
To Next Page
Loading...
Need help?
General
