EasyManuals Logo
Home>Cisco>Network Router>A9K-SIP-700

Cisco A9K-SIP-700 Configuration Guidelines

Cisco A9K-SIP-700
694 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #369 background imageLoading...
Page #369 background image
…
IP Source Guard: enabled, Logging: enabled
…
IP source guard drop counters:
packets: 1000, bytes: 64000
This example shows the output of the show l2vpn forwarding interface interface-name detail location
location-name command:
# show l2vpn forwarding interface g0/0/0/1.10 detail location 0/0/CPU0
Local interface: GigabitEthernet0/0/0/1.10, Xconnect id: 0x40001, Status: up
…
IP Source Guard: enabled, Logging: enabled
This example shows the logging display:
LC/0/0/CPU0:Jun 16 13:32:25.334 : l2fib[188]: %L2-L2FIB-5-SECURITY_IPSG_VIOLATION_AC : IP
source guard in AC GigabitEthernet0_0_0_7.1001 detected violated packet - source MAC:
0000.0000.0200, destination MAC: 0000.0003.0000, source IP: 130.0.0.1, destination IP:
125.34.2.5
LC/0/5/CPU0:Jun 16 13:33:25.530 : l2fib[188]: %L2-L2FIB-5-SECURITY_IPSG_VIOLATION_AC : IP
source guard in AC Bundle-Ether100.100 detected violated packet - source MAC: 0000.0000.0064,
destination MAC: 0000.0040.0000, source IP: 14.5.1.3, destination IP: 45.1.1.10
Configuring G.8032 Ethernet Ring Protection: Example
This sample configuration illustrates the elements that a complete G.8032 configuration includes:
# Configure the ERP profile characteristics if ERP instance behaviors are non-default.
ethernet ring g8032 profile ERP-profile
timer wtr 60
timer guard 100
timer hold-off 1
non-revertive
# Configure CFM MEPs and configure to monitor the ring links.
ethernet cfm
domain domain1
service link1 down-meps
continuity-check interval 100ms
efd
mep crosscheck
mep-id 2
domain domain2
service link2 down-meps
continuity-check interval 100ms
efd protection-switching
mep crosscheck
mep id 2
Interface Gig 0/0/0/0
ethernet cfm mep domain domain1 service link1 mep-id 1
Interface Gig 1/1/0/0
ethernet cfm mep domain domain2 service link2 mep-id 1
# Configure the ERP instance under L2VPN
l2vpn
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
343
Implementing Multipoint Layer 2 Services
Configuring G.8032 Ethernet Ring Protection: Example

Table of Contents

Other manuals for Cisco A9K-SIP-700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco A9K-SIP-700 and is the answer not in the manual?

Cisco A9K-SIP-700 Specifications

General IconGeneral
BrandCisco
ModelA9K-SIP-700
CategoryNetwork Router
LanguageEnglish

Related product manuals