mac
The mac attribute consists of six octets. This attribute is a net attribute in EVPN route type 2.
Example
mac in (0206.acb1.e806)
evpn-originator
The evpn-originator attribute specifies the originating router's IP address (4 or 16 octets). This is a net attribute
in EVPN route type 3 and 4.
Example
evpn-originator in (1.2.3.4)
evpn-gateway
The evpn-gateway attribute specifies the gateway IP address. The gateway IP address is a 32-bit or 128-bit
field (IPv4 or IPv6), and encodes an overlay next-hop for the IP prefixes. The gateway IP address field can
be zero if it is not used as an overlay next-hop. This is a path attribute in EVPN route type 5.
Example
evpn-gateway in (1.2.3.4)
EVPN RPL Attribute Set
In this context, the term set is used in its mathematical sense to mean an unordered collection of unique
elements. The policy language provides sets as a container for groups of values for matching purposes. Sets
are used in conditional expressions. The elements of the set are separated by commas. Null (empty) sets are
allowed.
prefix-set
A prefix-set holds IPv4 or IPv6 prefix match specifications, each of which has four parts: an address, a mask
length, a minimum matching length, and a maximum matching length. The address is required, but the other
three parts are optional. The prefix-set specifies one or more IP prefixes.
Example
prefix-set ip_prefix_set
14.2.0.0/16,
54.0.0.0/16,
12.12.12.0/24,
50:50::1:0/112
end-set
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
574
EVPN Features
EVPN RPL Attribute Set
To Next Page
Loading...
Need help?
General
