Allowed values are from 0 through 65535.
Step 7 max age seconds
Example:
RP/0/RSP0/CPU0:router(config-mstag-if)# max age 20
Sets the maximum age performance parameters for the bridge.
Allowed values for the maximum age time for the bridge in seconds are from 6 through 40.
Step 8 provider-bridge
Example:
RP/0/RSP0/CPU0:router(config-mstag-if)# provider-bridge
Places the current instance of the protocol in 802.1ad mode.
Step 9 bridge-id id
Example:
RP/0/RSP0/CPU0:router(config-mstag-if)# bridge-id 001c.0000.0011
Sets the bridge ID for the current switch.
Step 10 port-id id
Example:
RP/0/RSP0/CPU0:router(config-mstag-if)# port-id 111
Sets the port ID for the current switch.
Step 11 external-cost cost
Example:
RP/0/RSP0/CPU0:router(config-mstag-if)# external-cost 10000
Sets the external path cost on the current port.
Allowed values for port cost are from 1 through 200000000.
Step 12 hello-time seconds
Example:
RP/0/RSP0/CPU0:router(config-mstag-if)# hello-time 1
Sets the port hello time in seconds.
Allowed values are from 1 through 2.
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
436
Implementing Multiple Spanning Tree Protocol
Configuring MSTAG parameters
To Next Page
Loading...
Need help?
General
