Cisco CSACS-1121-K9 - Page 100

A-62
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
Defaults The ACS logs are located at /opt/CSCOacs/logs, and include the logs displayed in Table A-7:
filename Name of the logfile (up to 255 characters) whose contents you want to view.
| Output modifier variables:
• begin—Matched pattern. Up to 80 alphanumeric characters.
• count—Count the number of lines in the output. Add number after the
word count.
|—Output modifier variables (see Table A-8).
• end—End with line that matches. Up to 80 alphanumeric characters.
• exclude—Exclude lines that match. Up to 80 alphanumeric characters.
• include—Include lines that match. Up to 80 alphanumeric characters.
• last—Display last few lines of output. Add number after the word last.
Up to 80 lines to display. Default 10.
|—Output modifier variables (see Table A-8).
Ta b l e A-7 ACS Logs
Logs Description
ACSADAgent.log*
Stores the logs of an Active Directory client.
acsLogForward.log
Stores the debug log of log-forwarding processes.
ACSManagementAudit.log
Stores the details of the operations and configuration that are
performed by administrators when using the ACS web
interface or CLI.
ACSManagement.log
Stores information, warning, and debug messages from ACS
web interface, CLI, and UCP web-service components.
acsRuntime.log
Stores the debug logs from runtime subsystem.
acsupgrade.log
Stores the patch installation and upgrade operation logs.
monit.log
Stores information about the health of various ACS processes
that include web interface, runtime process that processes the
authentication and authorization requests, ACS database, and
ACS Monitoring and Report Viewer.
MonitoringAndReportingAlert.log
Stores the logs from view-alertmanager process.
MonitoringAndReportingCollector.log
Stores the logs from view-logprocessor process.
MonitoringAndReportingDatabase.log
Stores the logs from view-database process.
MonitoringAndReportingExpertTroubleshoo
ting.log
Stores the debug logs from the expert-troubleshooting feature
of the Monitoring and Report Viewer web interface.
MonitoringAndReportingProcess.log
Stores the logs from all of the ACS view processes.
MonitoringAndReportingScheduler.log
Stores the logs from view-jobmanager process.
MonitoringAndReportingUI.log
Stores the logs from Monitoring and Report Viewer web
interface.
acsLocalStore.log*
Stores the logs from the local system.