A-55
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
Usage Guidelines Specify a message using up to 2,048 characters.
Examples acs/admin# terminal session-welcome Welcome
acs/admin#
Related Commands
terminal terminal-type
To specify the type of terminal connected to the current line for the current session, use the terminal
terminal-type command in EXEC mode.
terminal terminal-type type
Syntax Description
Defaults VT100
Command Modes EXEC
Usage Guidelines Indicate the terminal type if it is different from the default of VT100.
Examples acs/admin# terminal terminal-type vt220
acs/admin#
traceroute
To discover the routes that packets take when traveling to their destination address, use the traceroute
command in EXEC mode.
traceroute [ip-address | hostname]
Syntax Description
Command Description
terminal session-timeout Sets the inactivity timeout for all sessions.
type Defines the terminal name and type, and permits terminal negotiation by
hosts that provide that type of service. Up to 80 alphanumeric characters.
ip-address IP address of the remote system. Up to 32 alphanumeric characters.
hostname Hostname of the remote system. Up to 32 alphanumeric characters.
To Next Page
Loading...
