A-65
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
show application [status | version [app_name]]
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines Here is a list of various application status displayed and their interpretation.
status Displays the status of the installed application.
Note For ACS usage, the display includes whether the ACS is the primary
or secondary, and the status of the services.
version Displays the application version for an installed application—the ACS.
app_name Name of installed application.
| Output modifier variables:
• begin—Matched pattern. Up to 80 alphanumeric characters.
• count—Count the number of lines in the output. Add number after the
word count.
|—Output modifier variables (see Table A-8).
• end—End with line that matches. Up to 80 alphanumeric characters.
• exclude—Exclude lines that match. Up to 80 alphanumeric characters.
• include—Include lines that match. Up to 80 alphanumeric characters.
• last—Display last few lines of output. Add number after the word last.
Up to 80 lines to display. Default 10.
|—Output modifier variables (see Table A-8).
Ta b l e A-8 Output Modifier Variables for Count or Last
| Output modifier variables:
• begin—Matched pattern. Up to 80 alphanumeric characters.
• count—Count the number of lines in the output. Add number after the
word count.
|—Output modifier variables.
• end—End with line that matches. Up to 80 alphanumeric characters.
• exclude—Exclude lines that match. Up to 80 alphanumeric characters.
• include—Include lines that match. Up to 80 alphanumeric characters.
• last—Display last few lines of output. Add number after the word last.
Up to 80 lines to display. Default 10.
|—Output modifier variables.
To Next Page
Loading...
