A-91
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
Examples Example 1
acs/admin# show udi
SPID: ADE-1010
VPID: VO1
Serial: 123455
acs/admin#
Example 2
acs/admin# show udi
SPID:: Cisco-VM_SPID
VPID: V01
Serial: Cisco-VM-SN
This output appears when you run the show udi command on VMWare servers running
VMWare
ESX 3.5.0.
show uptime
To display the length of time that you have been logged in to the ACS server, use the show uptime
command in the EXEC mode.
show uptime |
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines None.
Examples acs/admin# show uptime
4 day(s), 16:36:58
acs/admin#
| (Optional) Output modifier variables:
• begin—Matched pattern. Up to 80 alphanumeric characters.
• count—Count the number of lines in the output. Add number after the
word count.
• end—End with line that matches. Up to 80 alphanumeric characters.
• exclude—Exclude lines that match. Up to 80 alphanumeric characters.
• include—Include lines that match. Up to 80 alphanumeric characters.
• last—Display last few lines of output. Add number after the word last.
Up to 80 lines to display. Default 10.
To Next Page
Loading...
