A-76
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines None.
Examples acs/admin# show interface
NAME: "CSACS1120-K9 chassis", DESCR: "CSACS1120-K9 chassis"
PID: CSACS1120-K9 , VID: V01 , SN: CAM12345678
Total RAM Memory: 4149500 kB
CPU Core Count: 2
CPU 0: Model Info: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
CPU 1: Model Info: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
Hard Disk Count(*): 2
Disk 0: Device Name: /dev/sda
Disk 0: Capacity: 250.00 GB
Disk 0: Geometry: 255 heads 63 sectors/track 30401 cylinders
Disk 1: Device Name: /dev/sdb
Disk 1: Capacity: 250.00 GB
Disk 1: Geometry: 255 heads 63 sectors/track 30401 cylinders
NIC Count: 2
NIC 0: Device Name: eth0
NIC 0: HW Address: 00:15:17:59:73:81
NIC 0: Driver Descr: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connect
ion
NIC 1: Device Name: eth1
NIC 1: HW Address: 00:15:17:59:73:82
NIC 1: Driver Descr: e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connect
ion
(*) Hard Disk Count may be Logical.
acs/admin#
show logging
To display the state of system logging (syslog) and the contents of the standard system logging buffer,
use the show logging command in the EXEC mode.
show logging {application [application-name]} {internal} {system} |
Syntax Description application Displays application logs.
application-name—Application name. Up to 255 alphanumeric characters.
–
tail—Tail system syslog messages.
–
count—Tail last count messages. From 0 to 4,294,967,295.
|—Output modifier variables (see below).
internal Displays the syslogs configuration.
To Next Page
Loading...
