A-18
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
Usage Guidelines You cannot use this command on a secondary ACS node.
After you use this command, you must access your primary ACS node via the web interface and change
the password. If you use the default password for the web interface (default) to access the ACS
Configuration mode (which requires you to provide the web interface username and password), the login
fails and the system prompts you to change the default password.
Examples acs/admin# acs reset-password
This command resets the 'ACSAdmin' password to its original value.
Are you sure you want to continue? (yes/no) y
Password was reset successfully
acs/admin#
Related Commands
acs restore
To restore an ACS configuration (not including the ADE OS data) from one ACS node to another, use
the acs restore command in the EXEC mode.
acs restore backup-file-name repository repository-name
Command Description
acs (instance) Starts or stops an ACS instance.
acs backup Performs a backup of an ACS configuration.
acs-config Enters the ACS Configuration mode.
acs patch Installs and removes ACS patches.
acs reset-config Resets the ACS configuration to factory defaults.
acs restore Performs a restoration of an ACS configuration.
acs support Gathers information for ACS troubleshooting.
backup Backs up the system (ACS and ADE OS) and places the backup in a
repository.
backup-logs Backs up system logs.
debug-log Defines the local debug logging level for the ACS components.
export-data Restores to the default local debug logging level of the ACS
components.
replication force-sync Synchronizes the secondary ACS database to the primary ACS
database.
restore Restores from backup the file contents of a specific repository.
show debug-adclient Shows the debug log level status for subsystems (enabled or disabled).
show acs-logs Displays ACS server debug logs.
show application Shows application status and version information.
show version Displays information about the software version of the system.
To Next Page
Loading...
