A-7
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
• If you stop a view-based ACS process on an ACS server that is not a log collector, the CLI displays
the following message:
This is not a log collector node. Attempting to stop 'proc-name' anyway.
Where proc-name refers to the specific view process that you attempted to stop.
Caution Use this command only when you need to troubleshoot the operations of an ACS node; otherwise, Cisco
recommends that you maintain all of the ACS processes in running status, because ACS has high
dependency on the ACS processes.
Examples Example 1
acs/admin# acs start database
Starting database
acs/admin#
Example 2
acs/admin# acs stop database
Stopping database
acs/admin#
Related Commands
acs backup
To back up an ACS configuration (not including the ADE OS data), use the acs backup command in the
EXEC mode.
acs backup backup-filename repository repository-name
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command Description
acs (instance) Starts or stops an ACS instance.
show application Shows application status and version information.
backup-filename Name of the backup file. Up to 100 alphanumeric characters.
repository Repository command.
repository-name Location where files should be backed up to. Up to 30 alphanumeric
characters.
To Next Page
Loading...
