A-130
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Configuration Commands
Note After you enter the list-name in the kron policy-list command, you enter the config-Policy List
configuration submode (see the following Syntax Description).
Defaults No default behavior or values.
Command Modes Configuration
Usage Guidelines Use the kron policy-list command in conjunction with the cli command to create a Command Scheduler
policy containing EXEC CLI commands to be scheduled to run on the ACS server at a specified time.
Use the kron occurrence and policy list commands to schedule one or more policy lists to run at the
same time or interval. See
kron occurrence, page A-129.
cli Command to be executed by the scheduler. Up to 80 alphanumeric characters.
do EXEC command. Allows you to perform any EXEC commands in this mode
(see
do, page A-118).
end Exits from the config-Policy List configuration submode and returns you to
the EXEC mode.
exit Exits this submode.
no Negates the command in this mode. One keyword available:
• cli–Command to be executed by the scheduler.
To Next Page
Loading...
