Cisco CSACS-1121-K9 - Exit; Forceout

A-41
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
exit
To close an active terminal session by logging out of the ACS server or to move up one mode level from
the Configuration mode, use the exit command in the EXEC mode.
exit
Syntax Description No arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines Use the exit command in EXEC mode to exit an active session (log out of the ACS server) or to move
up from the Configuration mode.
Examples acs/admin# exit
Related Commands
forceout
To force users out of an active terminal session by logging them out of the ACS server, use the forceout
command in the EXEC mode.
forceout username
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command Description
end Exits the Configuration mode.
exit Exits the Configuration mode or EXEC mode.
Ctrl-z Exits the Configuration mode.
username The name of the user. Up to 31 alphanumeric characters.