Cisco CSACS-1121-K9 - Show Startup-Configuration

A-85
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
!
service sshd
!
repository myrepository
url ftp://209.165.200.234/backup
user bubba password gump
!
password-policy
lower-case-required
upper-case-required
digit-required
no-username
disable-cisco-passwords
min-password-length 6
!
logging localhost
logging loglevel 6
!
cdp timer 60
cdp holdtime 180
cdp run GigabitEthernet 0
!
icmp echo on
!
acs/admin#
Related Commands
show startup-configuration
To display the contents of the startup configuration file or the configuration, use the show
startup-configuration command in the EXEC mode.
show startup-configuration
Syntax Description No arguments or keywords.
Defaults The show startup-configuration command displays all of the startup configuration information.
Command Modes EXEC
Usage Guidelines None.
Command Description
configure Enters the Configuration mode.
show startup-configuration Displays the contents of the startup configuration file or the
configuration.