A-9
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
acs-config
To enter the ACS Configuration mode, use the acs-config command in the EXEC mode.
acs-config
Syntax Description No arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines You must have privileges to enter the ACS Configuration mode, and must supply the username and the
password that you use to log in to the ACS web interface. The default username and password to access
the ACS web interface are acsadmin and default, and the first time you log in to the web interface, you
will be prompted to change the default password. Cisco recommends that you do so for security reasons.
You can change your password for the first time only by logging in to the web interface. You will also
be prompted to install the license.
backup-staging-url Configures a Network File System (NFS) location that backup and
restore operations will use as a staging area to package and unpackage
backup files.
debug-log Defines the local debug logging level for the ACS components.
delete Deletes a file from the ACS server.
dir Lists a file from the ACS server.
kron occurrence Schedules one or more Command Scheduler commands to run at a
specific date and time or a recurring level.
export-data Restores to the default local debug logging level of the ACS
components.
reload Reboots the system.
replication force-sync Synchronizes the secondary ACS database to the primary ACS
database.
repository Enters the repository submode for configuration of backups.
restore Restores from backup the file contents of a specific repository.
show acs-logs Displays ACS server debug logs.
show backup history Displays the backup history of the system.
show debug-adclient Shows the debug log-level status for subsystems (enabled or disabled).
show repository Displays the available backup files located on a specific repository.
Command Description
To Next Page
Loading...
