A-67
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
Example 5
acs/admin# show application status acs
ACS is not running.
Issue 'application start acs' command to start ACS.
acs/admin#
Related Commands
show backup history
To display the backup history of the system, use the show backup command in the EXEC mode.
show backup history
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines None.
Examples Example 1
acs/admin# show backup history
Wed Jul 18 12:55:21 UTC 2007: backup logs logs-0718.tar.gz to repository fileserver007:
success
Wed Jul 18 12:55:53 UTC 2007: backup full-0718.tar.gpg to repository fileserver007:
success
acs/admin#
Example 2
acs/admin# show backup history
backup history is empty
Command Description
application install Installs an application bundle.
application remove Removes or uninstalls an application.
application start Starts or enables an application.
application stop Stops or disables an application.
application upgrade Upgrades an application bundle.
history Displays history information about any backups on the system.
To Next Page
Loading...
