A-5
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
Usage Guidelines If you use the acs stop command to stop your ACS, the ACS instance automatically starts the next time
the CSACS-1121 appliance boots up.
Examples Example 1
acs/admin# acs start
Starting ACS .............................
To verify that ACS processes are running, use the
'show application status acs' command.
Example 2
acs/admin#
acs/admin# acs stop
Stopping ACS ......................
acs/admin#
Related Commands Command Description
acs (process) Starts or stops an ACS process.
acs backup Performs a backup of an ACS configuration.
acs-config Enters the ACS Configuration mode.
acs patch Installs and removes ACS patches.
acs reset-config Resets the ACS configuration to factory defaults.
acs reset-password Resets the ‘acsadmin’ administrator password to the default setting.
acs restore Performs a restoration of an ACS configuration.
acs support Gathers information for ACS troubleshooting.
backup Performs a backup (ACS and ADE OS) and places the backup in a
repository.
backup-logs Backs up system logs.
debug-log Defines the local debug logging level for the ACS components.
export-data Restores to the default local debug logging level of the ACS
components.
replication force-sync Synchronizes the secondary ACS database to the primary ACS
database.
restore Restores from backup the file contents of a specific repository.
show debug-adclient Shows the debug log level status for subsystems (enabled or disabled).
show acs-logs Displays ACS server debug logs.
show application Shows application status and version information.
show version Displays information about the software version of the system.
To Next Page
Loading...
