Cisco CSACS-1121-K9 - Import-Export-Status; No Debug-Adclient

A-104
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
ACS Configuration Commands
Example 4
acs/admin(config-acs)# import-export-status all
Process id# is running; 10 out of 10 records are processed, 0 failed; 0 are pending.
acs/admin(config-acs)#
Example 5
acs/admin(config-acs)# import-export-status all
No process is running.
acs/admin(config-acs)#
Related Commands
no debug-adclient
To disable debug logging for an Active Directory client, use the no debug-adclient command in the ACS
Configuration mode. Only the network-device admin can enable or disable debug logging for an Active
Directory client.
no debug-adclient enable
Syntax Description No arguments or keywords.
Defaults Disabled.
Command Modes ACS Configuration
Usage Guidelines None.
Examples acs/admin(config-acs)# no debug-adclient enable
acs/admin(config-acs)#
Related Commands
Command Description
export-data Exports configuration data from an ACS local store to a remote
repository.
import-data Imports configuration data from a remote repository to an ACS local
store.
import-export-abort Aborts all or specific import or export processes.
Command Description
debug-adclient Enables debug logging for an Active Directory client.
debug-log Defines the local debug logging level for the ACS components.