A-129
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Configuration Commands
Command Modes Configuration
Usage Guidelines Use the kron occurrence and policy-list commands to schedule one or more policy lists to run at the
same time or interval.
Use the kron policy-list command in conjunction with the cli command to create a Command Scheduler
policy containing EXEC CLI commands to be scheduled to run on the ACS server at a specified time.
See
kron policy-list, page A-130.
Examples
Note When you run the kron command, backup bundles are created with a unique name (by adding a
time stamp), to ensure that the files do not overwrite each other.
Example 1: Weekly Backup
acs/admin(config)# kron occurrence WeeklyBackup
acs/admin(config-Occurrence)# at 14:35 Monday
acs/admin(config-Occurrence)# policy-list SchedBackupPolicy
acs/admin(config-Occurrence)# recurring
acs/admin(config-Occurrence)# exit
acs/admin(config)#
Example 2: Daily Backup
acs/admin(config)# kron occurrence DailyBackup
acs/admin(config-Occurrence)# at 02:00
acs/admin(config-Occurrence)# exit
acs/admin(config)#
Related Commands
kron policy-list
To specify a name for a Command Scheduler policy and enter the kron-Policy List configuration
submode, use the kron policy-list command in Configuration mode. To delete this, use the no form of
this command.
kron {policy-list} list-name
Syntax Description
Command Description
kron policy-list Specifies a name for a Command Scheduler policy.
acs backup Backs up an ACS configuration.
policy-list Specifies a name for Command Scheduler policies.
list-name Name of the policy list. Up to 80 alphanumeric characters.
To Next Page
Loading...
