A-112
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Configuration Commands
current onfigured
Mgmt disabled enabled
After restarting ACS, the show debug-log mgmt command displays:
current configured
Mgmt enabled enabled
Related Commands
Configuration Commands
Each Configuration command includes a brief description of its use, command syntax, usage guidelines,
and sample output.
Configuration commands include interface and repository.
Note Some of the Configuration commands require you to enter the configuration submode to complete the
command configuration.
To access the Configuration mode, you must use the configure command in the EXEC mode.
Command Description
acs (instance) Starts or stops an ACS instance.
acs (process) Starts or stops an ACS process.
acs backup Performs a backup of an ACS configuration.
acs-config Enters the ACS Configuration mode.
acs patch Installs and removes ACS patches.
acs reset-config Resets the ACS configuration to factory defaults.
acs reset-password Resets the ‘acsadmin’ administrator password to the default setting.
acs restore Performs a restoration of an ACS configuration.
acs support Gathers information for ACS troubleshooting.
backup Performs a backup (ACS and ADE OS) and places the backup in a
repository.
backup-logs Backs up system logs.
debug-log Enables debug logging for components.
export-data Disables debug logging for components.
restore Restores from backup the file contents of a specific repository.
show acs-logs Displays ACS server debug logs.
show application Displays application status and version information.
show version Displays information about the software version of the system.
To Next Page
Loading...
