Cisco CSACS-1121-K9 - Debug

A-37
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
config Configuration files.
• all—Enables all configuration debug output. Set level between 0 and 7
with 0 being severe and 7 being all.
• backup—Enables backup configuration debug output. Set level between
0 and 7 with 0 being severe and 7 being all.
• clock—Enables clock configuration debug output. Set level between 0
and 7 with 0 being severe and 7 being all.
• infra—Enables configuration infrastructure debug output. Set level
between 0 and 7 with 0 being severe and 7 being all.
• kron—Enables command scheduler configuration debug output. Set level
between 0 and 7 with 0 being severe and 7 being all.
• network—Enables network configuration debug output. Set level
between 0 and 7 with 0 being severe and 7 being all.
• repository—Enables repository configuration debug output. Set level
between 0 and 7 with 0 being severe and 7 being all.
• service—Enables service configuration debug output. Set level between
0 and 7 with 0 being severe and 7 being all.
copy Copy commands. Set level between 0 and 7 with 0 being severe and 7 being
all.
locks Resource locking.
• all—Enables all resource locking debug output. Set level between 0 and
7 with 0 being severe and 7 being all.
• file—Enables file locking debug output. Set level between 0 and 7 with
0 being severe and 7 being all.
logging Logging configuration files.
all—Enables all logging configuration debug output. Set level between 0 and
7 with 0 being severe and 7 being all.
snmp SNMP configuration files.
all—Enables all SNMP configuration debug output. Set level between 0 and
7 with 0 being severe and 7 being all.
system System files.
• all—Enables all system files debug output. Set level between 0 and 7
with 0 being severe and 7 being all.
• id—Enables system ID debug output. Set level between 0 and 7 with 0
being severe and 7 being all.
• info—Enables system info debug output. Set level between 0 and 7 with
0 being severe and 7 being all.
• init—Enables system init debug output. Set level between 0 and 7 with 0
being severe and 7 being all.
transfer File transfer. Set level between 0 and 7 with 0 being severe and 7 being all.