A-68
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
Related Commands
show cdp
To display information about the enabled CDP interfaces, use the show cdp command in the EXEC
mode.
show cdp {all | neighbors}
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines None.
Examples Example 1
acs/admin# show cdp all
CDP protocol is enabled ...
broadcasting interval is every 60 seconds.
time-to-live of cdp packets is 180 seconds.
CDP is enabled on port GigabitEthernet0.
acs/admin#
Example 2
acs/admin# show cdp neighbors
CDP Neighbor : acs-test2
Local Interface : GigabitEthernet0
Device Type : cisco WS-C3560G-48PS
Port : GigabitEthernet0/36
Address : 209.165.200.225
acs/admin#
Command Description
backup Performs a backup (ACS and ADE OS) and places the backup in a
repository.
restore Restores from backup the file contents of a specific repository.
repository Enters the repository submode for configuration of backups.
show repository Displays the available backup files located on a specific repository.
all Shows enabled CDP interfaces.
neighbors Shows CDP neighbors.
To Next Page
Loading...
