Cisco CSACS-1121-K9 - Undebug; Traceroute

A-56
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines None.
Examples acs/admin# traceroute 172.16.0.1
traceroute to 172.16.0.1 (172.16.0.1), 30 hops max, 38 byte packets
1 172.16.0.1 0.067 ms 0.036 ms 0.032 ms
acs/admin#
undebug
To disable debugging functions, use the undebug command in EXEC mode.
undebug {all | application | backup-restore | cdp | config | copy | locks | logging | snmp | system
| transfer | user | utils} level
Syntax Description all Disables all debugging.
application Application files.
• all—Disables all application debug output.
• install—Disables application install debug output.
• operation—Disables application operation debug output.
• uninstall—Disables application uninstall debug output.
backup-restore Backs up and restores files.
• all—Disables all debug output for backup-restore.
• backup—Disables backup debug output for backup-restore.
• backup-logs—Disables backup-logs debug output for backup-restore.
• history—Disables history debug output for backup-restore.
• restore—Disables restore debug output for backup-restore.
cdp CDP configuration files.
• all—Disables all CDP configuration debug output.
• config—Disables configuration debug output for CDP.
• infra—Disables infrastructure debug output for CDP.