Cisco CSACS-1121-K9 - Show Debug-Log

A-111
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
ACS Configuration Commands
– runtime-dataaccess
– runtime-dbpassword
– runtime-eap
– runtime-event-handler
– runtime-idstores
– runtime-infrastructure
– runtime-logging
– runtime-logging-notification-flow
– runtime-message-bus
– runtime-message-catalog
– runtime-radius
– runtime-rule-engine
– runtime-state-manager
– runtime-tacacs
– runtime-xml-config
• mgmt (management)—If you select this component, all other mgmt subcomponents are included;
see mgmt- items in the list below:
– mgmt-audit
– mgmt-common
– mgmt-aac
– mgmt-bl
– mgmt-cli
– mgmt-gui
– mgmt-system
– mgmt-notification
– mgmt-bus
– mgmt-dbal
– mgmt-replication
– mgmt-distmgmt
– mgmt-validation
– mgmt-changepassword
– mgmt-license
– mgmt-acsview
Examples When the ACS server starts up, the show debug-log mgmt command produces the following output:
current configured
Mgmt disabled disabled
After issuing the debug-log mgmt enable command, the show debug-log mgmt command displays: