A-31
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
clock
To set the system clock, use the clock command in the EXEC mode. To remove this function, use the no
form of this command.
clock {set} [month day hh:min:ss yyyy]
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines Sets the system clock. You must restart the ACS server to take effect of the changes after setting the
clock.
Examples acs/admin# clock set Jan 4 05:05:05 2007
Clock was modified. You must restart ACS.
Do you want to restart ACS now? (yes/no) yes
Stopping ACS .................
Starting ACS ......................
acs/admin#
Related Commands
show backup history Displays the backup history of the system.
show repository Displays the available backup files located on a specific repository.
Command Description
set Sets the system clock.
month Current month of the year by name. Up to three alphabetic characters. For
example, Jan for January.
day Current day (by date) of the month. Value = 0 to 31. Up to two numbers.
hh:mm:ss Current time in hours (24-hour format), minutes, and seconds.
yyyy Current year (no abbreviation).
Command Description
show clock Displays the time and date set on the system software clock.
To Next Page
Loading...
