Cisco CSACS-1121-K9 - Backup-Staging-Url; Cdp Holdtime; Cdp Run; Cdp Timer

A-113
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Configuration Commands
Table A-15 lists the Configuration commands that this section describes.
backup-staging-url
To allow you to configure a Network File System (NFS) location that backup and restore operations will
use as a staging area to package and unpackage backup files, use the backup-staging-url command in
Configuration mode.
backup-staging-url word
Syntax Description
Defaults No default behavior or values.
Command Modes Configuration
Usage Guidelines The URL is NFS only. The format of the command is backup-staging-url nfs://server:path.
Ta b l e A-15 List of Configuration Commands
• backup-staging-url
• cdp holdtime
• cdp run
• cdp timer
• clock timezone
• do
• end
• exit
• hostname
• icmp echo
• interface
• ip address
• ip default-gateway
• ip domain-name
• ip name-server
• ip route
• kron occurrence
• kron policy-list
• logging
• ntp server
• password-policy
• repository
• service
• shutdown
• snmp-server community
• snmp-server contact
• snmp-server host
• snmp-server location
• username
word NFS URL for staging area. Up to 2048 alphanumeric characters. Use
nfs://server:path
1
.
1. Server is the server name and path refers to /subdir/subsubdir. Remember that a colon (:) is required after the server.