Cisco CSACS-1121-K9 - Nslookup; Mkdir

A-44
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines Use disk:/path with the directory name; otherwise, an error indicating that the disk:/path must be
included appears.
Examples acs/admin# mkdir disk:/test/
acs/admin# dir
Directory of disk:/
16384 Jun 28 2007 00:09:50 lost+found/
4096 Jun 28 2007 14:34:27 test/
Usage for disk: filesystem
88150016 bytes total used
44585803776 bytes free
47064707072 bytes available
acs/admin#
Related Commands
nslookup
To look up the hostname of a remote system on the ACS server, use the nslookup command in the EXEC
mode.
nslookup word
Syntax Description
Defaults No default behavior or values.
directory-name The name of the directory to create. Use disk:/path with the directory name.
Up to 80 alphanumeric characters.
Command Description
dir Displays a list of files on the ACS server.
rmdir Removes an existing directory.
word IPv4 address or hostname of a remote system. Up to 64 alphanumeric
characters.