A-1
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
APPENDIX
A
ACS Command Reference
This appendix contains an alphabetical listing of the commands specific to the Cisco Secure ACS 5.1.
The commands comprise these modes:
• EXEC
–
System-level
–
Show
• ACS Configuration
Use the EXEC mode system-level acs-config command to access the ACS Configuration mode.
• Configuration
–
Configuration submode
Use the EXEC mode system-level configure command to access the Configuration mode.
Each of the commands in this appendix is followed by a brief description of its use, command syntax,
usage guidelines, and one or more examples. Throughout this appendix, the ACS server uses the name
acs in place of the ACS server’s hostname.
Note If an error occurs in any command usage, use the debug command to determine the cause of the error.
Before proceeding to use the ACS CLI commands, familiarize yourself with disk space management in
CSACS-1121. This section describes disk space management for the purpose of managing logs that you
can view or download from the ACS CLI and includes:
• Debug logs.
• Debug backup logs.
• Platform logs.
Managing disk space on the CSACS-1121 is important to enable you to use ACS efficiently. Table A-1
describes the disk space allocated for each set of log files.
Ta b l e A-1 Disk Space Allocation for ACS Process Logs
Process Log File
Maximum Disk Space
(in MB)
ADE OS 1.2 /var/log/ade/ADE.log 50
Monit /opt/CSCOacs/logs/monit.log 55
To Next Page
Loading...
