Cisco CSACS-1121-K9 - Ip Address; Ip Default-Gateway; Ip Domain-Name

A-125
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Configuration Commands
Starting ACS ....
To verify that ACS processes are running, use the
'show application status acs' command.
acs/admin(config-GigabitEthernet)#
Related Commands
ip default-gateway
To define or set a default gateway with an IP address, use the ip default-gateway command in
Configuration mode. To disable this function, use the no form of this command.
ip default-gateway ip-address
Syntax Description
Defaults Disabled.
Command Modes Configuration
Usage Guidelines If you enter more than one argument or no arguments at all, an error occurs.
Examples acs/admin(config)# ip default-gateway 209.165.202.129
acs/admin(config)#
Related Commands
ip domain-name
To define a default domain name that the ACS server uses to complete hostnames, use the ip
domain-name command in Configuration mode. To disable this function, use the no form of this
command.
Command Description
shutdown (interface
configuration mode)
Disables an interface (see shutdown, page A-137).
ip default-gateway Sets the IP address of the default gateway of an interface.
show interface Displays information about the system IP interfaces.
interface Configures an interface type and enters the interface mode.
ip-address IP address of the default gateway.
Command Description
ip address (interface
configuration mode)
Sets the IP address and netmask for the Ethernet interface.