A-79
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
Usage Guidelines None.
Examples acs/admin# show memory
total memory: 2074924 kB
free memory: 1687324 kB
cached: 162984 kB
swap-cached: 0 kB
acs/admin#
show ntp
To show the status of the Network Time Protocol (NTP) associations, use the show ntp command in the
EXEC mode.
show ntp
Syntax Description No arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines None.
Examples acs/admin# show ntp
Primary NTP : 1.ntp.esl.cisco.com
Secondary NTP : 2.ntp.esl.cisco.com
synchronised to NTP server (209.165.202.129) at stratum 2
time correct to within 37 ms
polling server every 128 s
acs/admin#
Related Commands Command Description
ntp server Allows synchronization of the software clock by the NTP server for the
system.
To Next Page
Loading...
