Cisco CSACS-1121-K9 - Import-Export-Status

A-103
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
ACS Configuration Commands
import-export-status
To view the status of running import and export processes and to verify whether there are any pending
processes, use the import-export-status command in the ACS Configuration mode. Any user,
irrespective of role, can issue this command.
import-export-status {current | all | id id}
Syntax Description
Defaults None.
Command Modes ACS Configuration
Usage Guidelines None.
Examples Example 1
acs/admin(config-acs)# import-export-status current
20 out of 30 records are processed, 0 failed.[]
acs/admin(config-acs)#
Example 2
acs/admin(config-acs)# import-export-status id 3
Process id# 3 completed; 10 out of 10 records are processed, 0 failed.[]
acs/admin(config-acs)#
Example 3
acs/admin(config-acs)# import-export-status id 4
Process id# 3 is pending; its number in the pending queue is 8.
acs/admin(config-acs)#
import-data Imports configuration data from a remote repository to an ACS local
store.
import-export-status Displays the status of all or specific import or export processes.
Command Description
current Displays the status of the currently running processes.
all Displays the status of all the import and export processes, including any
pending processes.
id Displays the status of an import or export process with the specified ID. You
must specify the process ID.
id To view the import or export status based on a particular process, specify the
process ID.