Cisco CSACS-1121-K9 - Show Process; Show Ports

A-81
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
Examples acs/admin# show ports
Process : dbsrv10 (9253)
tcp: 0.0.0.0:2638, :::2638
Process : portmap (2615)
tcp: 0.0.0.0:111
udp: 0.0.0.0:111
Process : dbsrv10 (10019)
tcp: 0.0.0.0:43216, :::43216
Process : rt_daemon (9450)
tcp: 172.23.245.28:49
udp: 0.0.0.0:32771, 0.0.0.0:1812, 0.0.0.0:1813, 0.0.0.0:1645, 0.0.0.0:1646
Process : monit (6933)
tcp: 127.0.0.1:2812
Process : java (9756)
tcp: :::2020, ::ffff:127.0.0.1:8005, :::6666, :::2030, :::61616, :::80,
::ffff:127.0.0.1:51515, :::443
Process : sshd (2776)
tcp: :::22
Process : java (10023)
udp: :::20514
acs/admin#
show process
To display information about active processes, use the show process command in the EXEC mode.
show process |
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines None.
| (Optional) Output modifier variables:
• begin—Matched pattern. Up to 80 alphanumeric characters.
• count—Count the number of lines in the interface. Add number after the
word count.
• end—End with line that matches. Up to 80 alphanumeric characters.
• exclude—Exclude lines that match. Up to 80 alphanumeric characters.
• include—Include lines that match. Up to 80 alphanumeric characters.
• last—Display last few lines of output. Add number after the word last.
Up to 80 lines to display. Default 10.