A-53
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
Syntax Description
Defaults No default behavior or values.
Command Modes Operator
EXEC
Usage Guidelines None.
Examples acs/admin# telnet 172.16.0.11 port 23
ACS.cisco.com login: admin
password:
Last login: Mon Jul 2 08:45:24 on ttyS0
acs/admin#
terminal length
To set the number of lines on the current terminal screen for the current session, use the terminal length
command in the EXEC mode.
terminal length integer
Syntax Description
Defaults 24 lines
Command Modes EXEC
Usage Guidelines The system uses the length value to determine when to pause during multiple-screen output.
Examples acs/admin# terminal length 0
acs/admin#
ip-address IP address of the remote system. Up to 64 alphanumeric characters.
hostname Hostname of the remote system. Up to 64 alphanumeric characters.
port number (Optional) Indicates the port number of the remote host. From 0 to 65,535.
integer Number of lines on the screen. Contains between 0 to 511 lines, inclusive. A
value of zero (0) disables pausing between screens of output.
To Next Page
Loading...
