A-87
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
Usage Guidelines The show tech-support command is useful for collecting a large amount of information about your ACS
server for troubleshooting purposes. You can then provide output to technical support representatives
when reporting a problem.
Examples acs/admin# show tech-support
###################################################
Application Deployment Engine(ADE) - Release 1.0
Technical Support Debug Info follows...
###################################################
*****************************************
Checking dmidecode Serial Number(s)
*****************************************
0x0736C7F6
0x0736C803
0x0736C808
0x0736C81F
AZAX74601334
*****************************************
Displaying System Uptime...
*****************************************
20:41:46 up 6:42, 1 user, load average: 0.45, 0.20, 0.12
*****************************************
Display Memory Usage(KB)
*****************************************
total used free shared buffers cached
Mem: 4148032 2951612 1196420 0 59440 1873920
-/+ buffers/cache: 1018252 3129780
Swap: 8191992 0 8191992
*****************************************
Displaying Processes(ax --forest)...
*****************************************
PID TTY STAT TIME COMMAND
1 ? S 0:00 init [3]
2 ? S 0:00 [migration/0]
3 ? SN 0:00 [ksoftirqd/0]
4 ? S 0:00 [migration/1]
5 ? SN 0:00 [ksoftirqd/1]
--More--(Press Enter or Spacebar.)
Related Commands Command Description
show interface Displays the usability status of the interfaces.
show process Displays information about active processes.
show running-configuration Displays the contents of the current running configuration.
To Next Page
Loading...
