A-97
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
ACS Configuration Commands
–
mgmt-validation
–
mgmt-changepassword
–
mgmt-license
–
mgmt-acsview
The debug logging configuration remains in effect even after a reboot. To reconfigure, use the debug-log
command again or the no debug-log command.
When you set the log level of debug logs to DEBUG for the following components, the active directory
client logs are automatically enabled. Similarly, when you disable the DEBUG log level on one of these
components, the active directory logs are disabled:
• all
• mgmt
• runtime
• runtime-idstores
Examples acs/admin(config-acs)# debug-log mgmt level warn
acs/admin(config-acs)#
Related Commands Command Description
acs (instance) Starts or stops an ACS instance.
acs (process) Starts or stops an ACS process.
acs backup Performs a backup of an ACS configuration.
acs-config Enters the ACS Configuration mode.
acs patch Installs and removes ACS patches.
acs reset-config Resets the ACS configuration to factory defaults.
acs reset-password Resets the ‘acsadmin’ administrator password to the default setting.
acs restore Performs a restoration of an ACS configuration.
acs support Gathers information for ACS troubleshooting.
backup Performs a backup (ACS and ADE OS) and places the backup in a
repository.
backup-logs Backs up system logs.
export-data Restores to the default local debug logging level of the ACS
components.
replication force-sync Synchronizes the secondary ACS database to the primary ACS
database.
restore Restores from backup the file contents of a specific repository.
show debug-adclient Shows the debug log level status for subsystems (enabled or disabled).
show acs-logs Displays ACS server debug logs.
show application Shows application status and version information.
show version Displays information about the software version of the system.
To Next Page
Loading...
