A-118
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Configuration Commands
Note Several more time zones are available to you. On your ACS server, enter show timezones. A list of all
the time zones available in the ACS server appears. Choose the most appropriate one for your time zone.
Examples acs/admin(config)# clock timezone EST
Time zone was modified. You must restart ACS.
Do you want to restart ACS now? (yes/no)
Stopping ACS .................
Starting ACS ......................
acs/admin(config)# exit
acs/admin# show timezone
EST
acs/admin#
Related Commands
do
To execute an EXEC-level command from Configuration mode or any configuration submode, use the
do command in any configuration mode.
do arguments
Syntax Description
Command Description
show timezones Displays a list of available time zones on the system.
show timezone Displays the current time zone set on the system.
arguments The EXEC command to execute (see Table A-19).
Ta b l e A-19 Command Options for Do Command
Command Description
acs backup Performs a backup of an ACS configuration.
acs-config-mode Enters the ACS Configuration mode.
acs config-web-interface Enables or disables an interface for ACS configuration web.
acs patch Installs and removes ACS patches.
acs reset-config Resets the ACS configuration to factory defaults.
acs reset-password Resets the ‘acsadmin’ administrator password to the default setting.
acs restore Performs a restoration of an ACS configuration.
acs-start Starts an ACS instance.
acs-stop Stops an ACS instance.
acs support Gathers information for ACS troubleshooting.
application install Installs a specific application.
To Next Page
Loading...
