Cisco CSACS-1121-K9 - Page 158

A-120
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Configuration Commands
Command Default No default behavior or values.
Command Modes Configuration or any configuration submode
Usage Guidelines Use this command to execute EXEC commands (such as show, clear, and debug commands) while
configuring your server. After the EXEC command executes, the system will return to the configuration
mode you were using.
Examples acs/admin(config)# do show run
Generating configuration...
!
hostname ems-lnx106
ip domain-name cisco.com
interface ethernet 0
ip address 209.165.200.225 255.255.255.224
interface ethernet 1
shutdown
ip name-server 209.165.201.1
ip default-gateway 209.165.202.129
clock timezone Cuba
!
!
username admin password hash $1$hB$MxIZHvecMiey/P9mM9PvN0 role admin
!
!
logging localhost
logging loglevel 6
!
acs/admin(config)#
end
To end the current configuration session and return to the EXEC mode, use the end command in
Configuration mode.
end
Syntax Description No arguments or keywords.
Defaults No default behavior or values.
Command Modes Configuration