A-35
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
EXEC Commands
Example 2
acs/admin# copy logs filename file01 ftp://host01/ldir01
Example 3
acs/admin# copy logs mgmt ftp://host01/dir01
Example 4
acs/admin# copy logs runtime ftp://host01/dir01
Related Commands Command Description
acs (instance) Starts or stops an ACS instance.
acs (process) Starts or stops an ACS process.
acs-config Enters the ACS Configuration mode.
acs reset-config Resets the ACS configuration to factory defaults.
acs support Gathers information for troubleshooting.
backup Performs a backup (ACS and ADE OS) and places the backup in a
repository.
debug-log Defines the local debug logging level for the ACS components.
delete Deletes a file from the ACS server.
dir Lists a file from the ACS server.
export-data Restores to the default local debug logging level of the ACS
components.
reload Reboots the system.
replication force-sync Synchronizes the secondary ACS database to the primary ACS
database.
restore Restores from backup the file contents of a specific repository.
show debug-adclient Shows the debug log level status for subsystems (enabled or disabled).
show acs-logs Displays ACS server debug logs.
show application Shows application status and version information.
show version Displays information about the software version of the system.
To Next Page
Loading...
