Cisco SCE8000 Configuration Guide

Contents
viii
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
How to Define Recurring Daylight Saving Time Transitions 5-42
How to Define Non-Recurring Daylight Saving Time Transitions 5-43
How to Cancel the Daylight Saving Time Configuration 5-43
How to Display the Current Daylight Saving Time Configuration 5-43
Domain Name Server (DNS) Settings 5-44
Configuring DNS Lookup 5-44
How to Enable DNS Lookup 5-44
How to Disable DNS Lookup 5-44
Configuring Name Servers 5-45
Options 5-45
How to Define Domain Name Servers 5-45
How to Remove a Domain Name Server 5-45
How to Remove All Domain Name Servers 5-46
How to Add a Host to the Host Table 5-46
Options 5-46
Adding Hosts to Removing them from the Host Table: Examples 5-46
How to Display Current DNS Settings 5-46
Displaying Current DNS Settings: Example 5-46
CHAPTER 6 Configuring the Line Interface 6-1
Line Interfaces 6-1
Flow Control and Bandwidth Considerations 6-1
Maximum Packet Size 6-1
How to Configure the Ten Gigabit Ethernet Line Interfaces 6-2
Tunneling Protocols 6-2
Selecting the Tunneling Mode 6-3
How to Configure IP Tunnels 6-4
IPinIP Tunneling 6-4
How to Configure the VLAN Environment 6-6
How to Configure the L2TP Environment 6-6
Asymmetric L2 Support 6-7
How to Display the Tunneling Configuration 6-8
Configuring Traffic Rules and Counters 6-8
Traffic Rules and Counters 6-8
What are Traffic Rules and Counters? 6-8
Traffic Rules 6-9
Traffic Counters 6-10
Configuring Traffic Counters 6-10
How to Create a Traffic Counter 6-10

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English