Cisco SCE8000 Configuration Guide

Contents
vii
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
About CLI 5-27
About MIBs 5-27
Configuration via SNMP 5-28
Configuring SNMP Community Strings 5-28
How to Define a Community String 5-28
How to Remove a Community String 5-29
How to Display the Configured Community Strings 5-29
How to Configure SNMP Notifications 5-29
About SNMP Notifications 5-29
How to Define SNMP Hosts 5-30
IP Configuration 5-33
Configuring the IP Routing Table 5-33
About the IP Routing Table 5-33
How to Configure the Default Gateway 5-34
How to Add an Entry to the IP Routing Table 5-34
How to Display the IP Routing Table 5-34
IP Advertising 5-35
Configuring IP Advertising 5-36
How to Display the Current IP Advertising Configuration 5-37
How to Configure the IP Address of the Management Interface 5-37
Options 5-37
Configuring the IP Address of the Management Interface: Example 5-37
Configuring Time Clocks and Time Zone 5-38
Displaying the System Time 5-38
Displaying the System Time: Example 5-38
Displaying the Calendar Time 5-39
Displaying the Calendar Time: Example 5-39
Setting the System Clock 5-39
Options 5-39
Setting the System Clock: Example 5-39
Setting the Calendar 5-39
Options 5-39
Setting the Calendar: Example 5-40
Setting the Time Zone 5-40
Options 5-40
Setting the Time Zone: Example 5-40
Removing the Current Time Zone Setting 5-41
Configuring Daylight Saving Time 5-41
Options 5-41
Guidelines 5-42

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English