Cisco SCE8000 Configuration Guide

Contents
vi
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Setting the IP Address and Subnet Mask of the Management Interface 5-3
Options 5-3
Setting the IP Address and Subnet Mask of the Management Interface: Example 5-3
Configuring the Management Interface Speed and Duplex Parameters 5-3
Interface State Relationship to Speed and Duplex 5-4
How to Configure the Speed of the Management Interface 5-4
How to Configure the Duplex Operation of the Management Interface 5-5
How to Monitor the Management Interface 5-5
Configuring the Available Interfaces 5-6
TACACS+ Authentication, Authorization, and Accounting 5-6
Information About TACACS+ Authentication, Authorization, and Accounting 5-6
How to Configure the SCE Platform TACACS+ Client 5-9
How to Manage the User Database 5-12
Configuring AAA Login Authentication 5-16
Configuring AAA Privilege Level Authorization Methods 5-17
Configuring AAA Accounting 5-18
Monitoring TACACS+ Servers 5-19
Monitoring TACACS+ Users 5-19
Configuring Access Control Lists (ACLs) 5-19
About Access Control Lists 5-20
Options 5-20
How to Add Entries to an ACL 5-21
How to Remove an ACL 5-21
How to Enable an ACL 5-21
Managing the Telnet Interface 5-21
About the Telnet Interface 5-22
How to Prevent Telnet Access 5-22
How to Configure the Telnet Timeout 5-22
Configuring the SSH Server 5-22
The SSH Server 5-23
Key Management 5-23
Managing the SSH Server 5-23
How to Monitor the Status of the SSH Server 5-24
Enabling the SNMP Interface 5-25
How to Enable the SNMP Interface 5-25
How to Disable the SNMP Interface 5-25
Configuring and Managing the SNMP Interface 5-25
About the SNMP Interface 5-25
SNMP Protocol 5-26
Security Considerations 5-26

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English