Cloos QINEO - Page 151

151
No.
Error message on the
display
Possible cause Remedy
58 IO module 2 failed CAN connection interrupted.
Switch machine Off and On
Check plug and connections
Service
59
VBC Profibus module
failed
CAN connection interrupted.
Switch machine Off and On
Check plug and connections
Service
60
Software version
operating module out-
of-date
Software update required.
Software update
Service
61
Software version QWD1
out-of-date
Software update required.
Software update
Service
62
Software version QWD2
out-of-date
Software update required.
Software update
Service
63
Software version QWD3
out-of-date
Software update required.
Software update
Service
64
Software version QWD4
out-of-date
Software update required.
Software update
Service
65
Software version DSP 1
out-of-date
Software update required.
Software update
Service
66
Software version DSP 2
out-of-date
Software update required.
Software update
Service
67
Software version IO
module 1 out-of-date
Software update required.
Software update
Service
68
Software version IO
module 2 out-of-date
Software update required.
Software update
Service
69
Software version VBC
ProfiNet out-of-date
Software update required.
Software update
Service
72
Robot communication
failed
CAN connection interrupted
between robot controller and
welding power source.
Switch machine Off and On
Check plug and connections
Service
73
No communication with
DSP
Interruption in the CAN bus of the
welding power source.
Check plug and connections
Check settings (set from automatic to
manual)
Service
180
Operating module - No
memory card found
No memory card or defective
memory card in the card slot of the
Premium operating module.
Change SD card
Service
181
Operating module
- Memory card not
formatted
Unformatted memory card, please
format memory card via PC/Laptop.
Please format SD card again
(FAT or FAT 32)
Service
182
Operating module - File
could not be opened/
found
Data on SD card cannot be read.
Check file on memory card
Use new memory card
Service