About this manual
1-2 9390 Reference manual
The manual contains 11 chapters.
Chapter 1 explains how to use the manual.
Chapter 2 explains how to install your transceiver and
connect the components that make up your station.
Chapter 3 explains how to set up channels, scan tables and
the telephone directory.
Chapter 4 explains how to use Setup mode to set up how the
transceiver works. You should read this before following any
Setup mode procedure described in Chapters 5–8.
Chapters 5–8 describe the Setup mode procedures which
have been separated into four parts for ease of reference.
Chapter 9 describes Link Setup mode procedures.
Chapter 10 lists all information and error messages output to
the transceiver display.
Chapter 11 covers technical information such as the
connector pin arrangements, ancillary equipment settings,
transceiver specifications, options and accessories.
We recommend that only Codan approved service agents
perform maintenance on the transceiver.
To Next Page
Loading...
Need help?
General
