Codan 9390 - Recall Channels by Frequency

Setup procedures (part 3)
7-20 9390 Reference manual
Recall channels by frequency on/off
Setup code 32
This procedure controls whether you can recall channels by
frequency in addition to channel number.
To switch the recalling of channels by frequency on or off:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 32
numeral
buttons
The display shows:
EXIT
Freq recall enabled
ENTER
ENABLED
Recall by Frequency
or
EXIT
Recall by Frequency
Freq recall disabled
ENTER
DISABLED