Codan 9390 - RS-232 Connection Baud Rate

Setup procedures (part 3)
9390 Reference manual 7-27
RS-232 connection baud rate
Setup code 3412
This procedure sets the speed of information transfer for
equipment connected to either the
RS232
socket or
GP
connector on the transceiver rear panel.
You can select for the baud rate:
• ‘
300
’
• ‘
600
’
• ‘
1200
’
• ‘
2400
’
• ‘
4800
’
• ‘
9600
’.
For a GPS receiver, the baud rate is usually 4800. For a
computer or an ALE controller, the baud rate is usually 9600.
To set the baud rate for the
RS232
socket and
GP
connector:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2