Channel and scan table setup
9390 Reference manual 3-11
Changing the receive frequency of a channel
Frequencies of protected channels (unless you have option
TXE) and Radphone channels cannot be changed. To change
the receive frequency of one of these channels, you copy the
channel and edit the copy.
To change the receive frequency of a protected or Radphone
channel:
Action Notes
1.
In Channel mode, select
the channel that you want
to change.
Example of the display for
channel 428:
428
RF–ON
Rx.
USB
HI
Radphone
Pwr
4351
2.
Press twice
Enter
R'call
Example of the display:
DELETE
ENTER
Enter Channel No.
–428
3.
Enter the number of a
new, unused channel
numeral
buttons
For example, enter 450 to copy
channel 428 to unused channel
450.
To Next Page
Loading...
Need help?
General
