Channel and scan table setup
9390 Reference manual 3-21
Creating a transmit channel (option)
You can only use this procedure to create a transmit channel
if you have option TXE (Transmit Enable).
TXE allows you to change the transmit frequency of any
channel except a Radphone channel. TXE overrides any
channel protection.
Under special circumstances TXE may be fitted at the time of
purchase where local licensing authorities permit.
To create a transmit channel:
Action Notes
1.
In Channel mode, press
twice
Enter
R'call
Example of the display:
DELETE
ENTER
Enter Channel No.
–804
2.
Enter the number of a
new, unused channel
numeral
buttons
For example, enter 9991.
If you do not enter a number,
you will edit the displayed
channel instead of creating a
new one.
3.
Press
Enter
R'call
Example of the display:
EXIT ENTER
Enter Receive Freq
RX 8,728.00
To Next Page
Loading...
Need help?
General
