Setup procedures (part 1)
9390 Reference manual 5-17
Call privacy on/off (option)
Setup code 2443
This procedure limits the stations that can receive your
transmissions of GPS and page information.
Before you can use this procedure, you need to enable the
selcall option (see Chapter 7, Password entry to enable
transceiver options).
You switch on call privacy by setting a privacy key (a number
up to six digits). This restricts the stations that can receive
your information to those using an identical privacy key.
To switch call privacy on or off:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2
To Next Page
Loading...
Need help?
General
