Setup procedures (part 1)
5-2 9390 Reference manual
ALE option settings (option)
Setup code 2431
This procedure controls how the ALE (Automatic Link
Establishment) controller works.
Before you can use this procedure, you need to enable both the
selcall and ALE options (see Chapter 7, Password entry to
enable transceiver options).
There are 17 ALE system settings numbered 0–16. These
settings control ALE call performance and do not usually
require changing. You can change nine. The remaining eight
are not displayed since their values are fixed.
Setting No. Description
0 Sounding On/Off
2 Channel Quality Decay Time
3 Sounding Signal Length
5 BER Threshold
6 Golay Threshold
7 Error Threshold
11 ALE Silent Mode
13 Call Retry Limit
14 Channel Quality Averaging
For further information, this manual should be read in
conjunction with the 9300 ALE controller user guide (Codan
part number 15-04046).
To Next Page
Loading...
Need help?
General
